We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email : sales@checkline.eu
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

DXE Special tension meter for limited access space


Made in GermanySpecial purpose models feature small measuring heads, where access space is limited or where filaments run close together.

These tension meters are recommended where the standard Model DX2 cannot be used

Note: This model does not include a material thickness compensator

Features
  • Turned-up outer finger edges guide the running filament into the roller grooves
  • Special finger support located on the rear side reduces the effort to move the outer roller assembly
  • Everything in operator's view:
    - the guide rollers
    - the measured material
    - the readings
  • 41 mm Ø scale
  • Optionally available: Inspection Certificate 3.1 according DIN EN 10204 with calibration report
  • Small, ball-bearing mounted, V-grooved guide rollers
  • Built-in mounting holes permit fixed installation for continuous tension measurement
  • Each instrument is individually calibrated for highest accuracy
  • Rugged aluminum housing
  • Certificate of Compliance with the order 2.1 according DIN EN 10204 is included

Tension Ranges
ModelRanges Measuring Head Width X* approx. mmMeasuring Head Length Y approx. mmSCHMIDT Calibration Material** 
DXE-50 10-50 3847PA: 0.12 mm Ø 
DXE-120 20-120 3847PA: 0.12 mm Ø 
DXE-200 20-200 3847PA: 0.12 mm Ø 
DXE-400 20-400 3847PA: 0.20 mm Ø 
DXE-1000 50-1000 3847PA: 0.30 mm Ø 
DXE-2000 200-2000 3847PA: 0.50 mm Ø 
Other tension ranges available on request. Other units of measure available, such as g.
* Width of bracket assembly
** Suitable for 95% of applications - PA = Polyamide Monofilament

Special calibration using customer supplied samples is recommended, if process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape. For this purpose a material sample of about 5 m should be supplied.

Complete Kit
Delivery includes:
Tension meter with carrying case, operating instructions in English or German as requested

Specifications
Calibration:According to SCHMIDT factory procedure
Accuracy:±1% full scale or ±1 graduation on scale
Scale diameter:41 mm
Temperature range:10-45ºC
Air humidity:85% RH, max.
Housing material:Die-cast aluminum
Housing dimensions:188 x 85 x 45 mm (L x W x H)
Weight, net (gross):approx. 470 g (1000 g)

Options
Code A: Air DampingCode M: Memory Pointer

This adjustable mechanical air dashpot is recommended for applications in which great fluctuations of the measured tension occur, as in spooling and winding machines.
This assures steady tension readings on the scale.

Retains the highest measured value (PEAK).
Available for mechanical tension meters.

Air DampingMemory Pointer

\n