Contact
Phone:
+44 (0)121 2855 222
Email :
sales@checkline.eu
The Dakota ZX-5DL Wall Thickness Gauge is deployed for precise one-sided measurement of wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics.
Total Measuring Range (depends on material and transducer/probe type)
0.63 - 914.4 mm
Measuring Range on Steel (with standard T-102-2000 probe)
1.00 - 199.9 mm
In addition to all the features of the Zx-series it also has a built-in data memory for 10,000 values with 250 readings per batch (up to 40 separate batches) and a USB Output. Data transfer is possible via any program in ".csv" format or data can also be viewed in Datacomm Software (available to download for free).
The Zx-5DL can be used in a Single Thickness Reading mode or in a Scan mode can be selected. in the Scan-mod the probe is passed over a large area and then the minimum thickness value measured will be indicated.
The ZX-5DL is very robust, with an impact-resistant and environmentally sealed (IP65) gauge and a waterproof probe that can be plunged underwater.
 |
Minimum Radius for Convex Surfaces | 8.89 mm |
| Minimum Radius for Concave Surfaces | 76.2 mm | |
 |
Minimum Headroom | 25.0 mm |
 |
Minimum Sample Diameter | 3.8 mm |
 |
Minimum Substrate Thickness - F | na |
| Minimum Substrate Thickness - NFe | na |
Zeroing:
Automatic or manual zeroing of the test head
Probe diameter:
Specify the probe diameter for increased linearity.
High-speed surface scan:
Shows the lowest value detected during a 100 Hz scan.
Differential mode:
Displays ± deviation from an entered nominal value.
Alarm Mode:
Adjustable maximum and minimum limits. Limit indicated by a visual and an audible alarm.
The ZX-5DL is supplied as a complete kit with the gauge, probe, 120 ml bottle of coupling fluid, 2 AA batteries, USB output cable, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.
| Total Measuring Range: | 0.63 - 914.4 mm (depending on material and probe type) |
| Measuring Range (Steel): | 1.00-199.9 mm (with standard probe T-102-2000) |
| Resolution: | 0.01 mm |
| Measuring Mode: | Pulse-Echo (P-E), Differential |
| Velocity range: | 305 to 18,542 meters/sec |
| Probe (standard): | 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2000 |
| Probes (optional): | 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) |
| Cable: | 1.2 m waterproof cable with non-polarized, quick-disconnect connectors |
| Display: | Large LCD display with 4.5 digits each 1.3 cm high -Adjustable backlight -Division into individual segments to ensure clear reproduction of advanced information |
| Display refresh rate: | 10 Hz (10 updates/sec) |
| Battery Type: | 2x AA batteries (rechargeable batteries can be used) |
| Temp. Limits: | Material: -20 to 100° C High temperature probes available |
| Battery Life: | 45 hours continuous use |
| Output Type: | USB-C (single data value transfer, no built-in memory) |
| Housing: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) |
| Housing Rating: | IP65 |
| Pulse Repetition Frequency (PRF): | 200 Hz (200 pulses/sec) |
| Dimensions: | 63.5 x 131.3 x 31.5 mm |
| Weight: | 308 grams |
| Certifications: | NIST Traceable |
| Guarantee: | Device: 5 Years Probes: 90 Days |
