DPM502 Digital Tension Indicator
The DPM502 is designed to connect to the TS621 or TS481 Strain Gauge Amplifier, as well as the RFSE Tension Sensor.
It incorporates built-in calibration adjustments to scale the tension values into display units. The 3 1 /2 LED display has a user-set decimal point and will display values up to 1999. Faceplate is easily removed to make calibration adjustments.
It incorporates built-in calibration adjustments to scale the tension values into display units. The 3 1 /2 LED display has a user-set decimal point and will display values up to 1999. Faceplate is easily removed to make calibration adjustments.
- Selectable “damping function” reduces display fluctuations
- Scaling by means of 2 multiturn trimmers (rough / coarse)
- Easy snap-in installation
- 24V DC power supply with galvanic isolation
User control pots & dip switches are accessed behind display panel.
RFS On-Line Tension Sensor
- Resolution of 0.1% and better
- Rugged stainless steel housing is environmentally sealed
- Overload protection up to 800%
More details
TS481 Strain Gauge Measurement Amplifier
- Galvanic Isolation minimizes the chance for signal interference, including ground faults
- Provides accuracy of ±0.1%
- User-enabled "damping function" eliminates tension fluctuations
More details
TS621 Strain Gauge Amplifier
- Designed for use with a wide range of strain-gauge-based force, load and tension sensors
- 0-10VDC analog output
More details
MU621 Tension Indicator/Amplifier Console
- For strain gauge sensors
- 1 to 4 measuring channels
More details
| Display | 3 1 /2 - digit LED (1999 max.) 14mm height |
| Decimal Point | User-Selected |
| Damping Rate | 0.2 to 4 sec. |
| Display Update Rate | 0.5 sec. |
| Power Required | 24 VDC @ 50 mA (approx) |
| Panel Cutout | 92 x 22 mm |
| Weight | 3.5 ounces (100 g) |
| Dimensions | 96mm W x 77mm D x 24mm H (3.7" W x 3" D x 1" H) |
