TSH Tension Sensor TSH
The TSH Stationary electronic tension sensor for flexible material as wires, thin ropes and cables up to 15 mm Ø, as well as flat material up to 10 mm width.
It comes in 6 tension ranges from 0 - 1000 cN up to 0 - 50.00 daN.
Large, hardened guide rollers for minimized material deflection
Versatile tension sensor for quick and easy mounting
The TSH Tension sensor has an integrated measuring amplifier and high accuracy of 1 % Full Scale.
Ball-bearing mounted guide rollers:
– V-grooved (for material with max. 4 mm Ø)
– U-grooved (for material with 3 up to 15 mm Ø)
– Tape grooved (for material with max. width of 10 mm)
Various output signals are available:
– analog: 0 – 1 V (standard), 0 – 10 V (optional)
– current: 4 – 20 mA (optional)
– analog DMS: mV/V (optional)
- Tension sensor TSH with rugged aluminum housing
- Required power supply +15…24 V DC (regulated)
- Certificate of Compliance with the order 2.1 according EN 10204 is included
- Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report
- Tension sensor TSH with integrated measuring amplifier and high accuracy 1 % FS
- Ball-bearing mounted guide rollers,
– V-grooved (for material with max. 4 mm Ø)
– U-grooved (for material with 3 up to 15 mm Ø) – tape grooved (for material with max. width of 10 mm) - Various output signals are available:
– analog: 0 – 1 V (standard), 0 – 10 V (optional)
– current: 4 – 20 mA (optional)
– analog DMS: mV/V (optional) - Easy installation, even afterwards, on existing machines
- Easy calibration to customized material by operator – zero and gain calibration is required
- Measuring principle – load cell with high quality strain gauge bridge
- Tension sensor TSH with mechanical overload protection
- Tension sensor TSH with transport packaging
- Operating instruction in German and English (as requested)
- Certificate of Compliance with the order 2.1 according EN 10204 free of charge
| Model | Tension Range* | Measuring Head Width* | SCHMIDT Calibration Material** |
|---|---|---|---|
| TSH-1000 | 0 – 1000 cN | 150 mm | PA: 0.30 mm Ø |
| TSH-2000 | 0 – 2000 cN | 150 mm | PA: 0.50 mm Ø |
| TSH-5000 | 0 – 5000 cN | 200 mm | PA: 0.80 mm Ø |
| TSH-10K | 0 – 10 dAN | 200 mm | PA: 1.00 mm Ø |
| TSH-20K | 0 – 50 daN | 250 mm | PA: 1.50 mm Ø |
| TSH-50K | 0 – 50 daN | 250 mm | steel rope 1.50 mm Ø (7x7x0.20) |
| Other tension ranges and measuring head widths available on request. Other measuring units available, such as g or kg. * Outer distance between outside guide rollers or outside dimensions of front plate ** Suitable for 95 % of applications PA = Polyamide Monofilament Calibration to customized material: If process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape, special calibration using customer supplied samples is recommended. For this purpose a material sample of about 5 m should be supplied. |
|||
| Order-code | Line Speed vmax. … m/min | Roller Material |
|---|---|---|
| Standard | 4000 | Hardened steel (max. Ø 4 mm) |
| Code R1 | 4000 | Hard chrome-plated steel (Ø 3 – 9 mm) |
| Code R4 | 1000 | Hardened steel steel (Ø 8 – 11 mm) for model TSH-50K and higher |
| Code R5 | 1000 | Hardened steel steel (Ø 12 – 15 mm) for model TSH-50K and higher |
| Code B6 | 2000 | Hardened steel, width 6 mm |
| Code B10 | 2000 | Hardened steel, width 10 mm |
Standard
Output signal: 0 – 1 V DC
Code A2
Output signal: 0 – 10 V DC
Code A3
Output signal: 4 – 20 mA DC
Code A10
Output signal: mV/V
For sensors without amplifier
incl. firmly connected cable with open ends, 2 m long
Please indicate the complete item number.:
| Model with tension range | Code guide Rollers (if not standard) | Code output signal (if not standard) | Complete item No. | |||
|---|---|---|---|---|---|---|
| TSH-10K | + | R1 | + | A2 | = | TSH-10K-R1-A2 |
| E10061 - Diode Plug with Bayonet Cap Diode Plug | |
 |
Diode Plug suitable for sensors of TS series, cable outlet 3.5 – 6 mm Order number: E10061 |
| EK0603, EK0605 and EK0610 - Connecting Cable with 2 diode plugs | |
 |
Connecting cable with 2 diode plugs, for analog output and voltage signal. For connecting the TS sensor to the display unit SCD-1. Order number: EK0603, Length 3 m Order number: EK0605, Length 5 m Order number: EK0610, Length 10 m |
| EK0612, EK0614 and EK0615 - Connecting Cable with 1 diode plug and open ends | |
 |
Connecting cable with 1 diode plug and open ends, for analog output and current signal. Other cable length available on request! |
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request