SERIES-TT02 Series-TT02 Torque Tool Tester for (Electric) Screw Drivers

The Series TT02 torque tool testers provide a solution for testing smaller powered and manual torque tools like screwdrivers and wrenches.

This compact torque tester is equipped with a universal 3/8”square and comes standard with a 1/4” hex to 3/8” adapter, measures torque in both directions and calculates 1^st and 2^nd peaks for click type tools.

The TT02 provides reliable and consistent results with its accuracy of 0,3% and 7000 Hz sampling rate. An internal memory storage of 1000 measurements combined with USB, RS-232, Mitutoyo, and analog outputs assure all data is saved and can be processed. Password protection saves the data from an accidental delete or unauthorized changes to setup or calibration.

Data is transferred to a computer through the standard USB cable and MESUR^® Lite data acquisition software. Downloaded data can be exported to Excel for further processing

An optional rundown fixture, AC1066-1 and/or -2, can be used to simulate soft and hard joints.

The TT02 is not suited for use with impact tools.

Model	Ncm	Nm	kgFcm	ozFin	lbFin
TT02-12	135 x 0,1	1,35 x 0,001	14 x 0,01	192 x 0.1	12 x 0.005
TT02-25	290 x 0,2	2,9 x 0,002	28 x 0,02	400 x 0.2	25 x 0.01
TT02-50	570 x 0,5	5,7 x 0,005	58 x 0,05	800 x 0.5	50 x 0.02
TT02-100	1150 x 0,5	11,5 x 0,005	116 x 0,1	1600 x 1	100 x 0.05

The Series TT02 is delivered including the following items:

1/4” hex to 3/8” square adapter
AC adapter
Battery
Quick-start guide
USB data cable
Resource CD with user manual
MESURlite software
MESURgauge demo software
NIST traceable calibration certificate

Accuracy	±0.3% of full scale
Sampling rate	7000 Hz
Power	AC or rechargeable battery. Multi-step low battery indicator is displayed, tester shuts off automatically when power is too low
Battery Life	Backlight on: up to 7 hours of continuous use Backlight off: up to 24 hours of continuous use
Measurement units	Nm, Ncm, ozFin, lbFin, lbFft
Outputs	USB / RS-232: Configurable up to 115,200 baud. Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices Analog: ±1 VCD, ±0.25% of full scale at capacity General purpose: Three open drain outputs, one input Set points: Three open drain lines
Configurable Settings	1st/2nd peak, digital filters, outputs, automatic shutoff, default settings, key tones, backlight, audio alarms, passwords, calibration
Safe overload	150% of full scale (display shows “OVER” at 110% and above)
Weight	2.6 kg (5.8 lb)
Environmental Requirements	5°C - 45°C (40°F - 100°F) <96% humidity (non-condensating)
Warranty	3 years (see individual statement for further details)

TT-QC Torque Tool Tester

Bidirectional accuracy of ±1% of indicated reading
3 modes of operation: Track, Peak and 1st Peak
Eight (8) selectable engineering units: Oz.in., Lb.in., Lb.ft., Nm, cNm, KgfCm, gfCm, Kgfm

More details