We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email : sales@checkline.eu
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

Series-TT03 Digital Torque Meter for torque testing applications


Made in the USA

The TT03 Torque tester is a versatile device suitable for torque testing in a laboratory environment as for field testing applications. With its compact aluminum housing the TT03 can be used in a test stand setup or as handheld device depending on the circumstances and requirements. It can measure in clockwise and counter-clockwise torque testing applications.

The TT03 consists of a digital indicator connected to a dedicated remote torque sensor that is available in a 6 type capacity range from 7 Ncm to 1150 Ncm. The device features a 2000 Hz sampling rate and has an accuracy of ±0.5% of full scale with a backlit display that shows current and peak torque readings for each direction, set points, pass/fail indicators, rotation direction, units of measurements and an analog load bar with setpoint markers.

MESUR® Lite data acquisition software is included to exported the data through a USB connection with the included USB data cable for tabulation of continuous or individual data points. One-click export to Excel allows for further data manipulation.


 

 


Features
  • Peak memory for clockwise and counter clockwise readings saved and displayed
  • High-speed 2,000 Hz sampling rate
  • Single Reading USB data output
  • Programmable set points with pass/fail indicators
  • Configurable audio alarms and key tones
  • Live load bar graphs with set point markers
  • CE mark
  • Made in the USA
  • Battery or AC operation

Capacity x Resolution
ModelNcmkgFmm lbFinozFin
MTT03-10Z7 x 0, 0057 x 0,005-10 x 0.01
MTT03-20Z14 x 0,0114 x 0,01-20 x 0.02
MTT03-50Z36 x 0,0536 x 0,05-50 x 0.05
MTT03-12135 x 0,1-12 x 0.01192 x 0.2
MTT03-50570 x 0,5-50 x 0.05800 x 0.5
MTT03-1001150 x 1-100 x 0.11600 x 1

Display

WT3-201 Display


Complete Kit

Series TT03 torque gauges include the following accessories:



Dimensions
Dimensions-Series-TT03


Accessories

Mesurgauge / Mesurgauge plus Load & Travel Analysis Software


  • Sends data from a force or torque gauge and travel display to a PC for further analysis

More details

Mesurgauge / Mesurgauge plus Load & Travel Analysis Software 126514

AC1008 Table Top Stand for 5I, 3I or TT03


  • For mounting the 5I, 3I or TT03 Series displays on a table

More details

AC1008 Table Top Stand for 5I, 3I or TT03 126928

Cic-Torque Torque Instrument Calibration


  • Short turnaround
  • Easy planning of calibration

More details

Cic-Torque Torque Instrument Calibration 127043

Category Force Gauge Accessories


Large assortment of grips, attachments and other accessories for analog and digital force gauges.

More details

Category  Force Gauge Accessories 0

Specifications
Accuracy:±0.5% of full scale ±1 digit
Calibrated range10 - 100%
Sampling rate:2,000 Hz
Power:AC or rechargeable battery. Multi-step low battery indicator is displayed, gauge shuts off automatically when power is too low.
Battery Life:Backlight on: up to 7 hours of continuous use
Backlight off: up to 24 hours of continuous use
Measurement units:lbFin, ozFin, kgFmm, Ncm (depending on model)
USB Output:Individual data point output by pressing DATA key. Configurable up to 115,200 baud.
Configurable Settings:Digital filters, USB output settings, backlight, automatic shutoff, key tones, audio alarms, default settings, calibration
Safe overload:150% of full scale (display shows “OVER” at 110% and above)
Weight:1.8 lb [0.8 kg]
Environmental requirements:40°F - 100°F [5°C - 45°C], < 96% humidity (non-condensating)
Warranty:3 Years

Related Products

Series-TT02 Series-TT02 Torque Tool Tester for (Electric) Screw Drivers


  • First / second peak capture for CW and CCW directions
  • 3/8” square receptacle accommodates common bits and attachments
  • High-speed 7000 Hz sampling rate accurately captures peak torque values

More details

Series-TT02 Series-TT02 Torque Tool Tester for (Electric) Screw Drivers

CAP-TT03 Hand-held Cap Torque Meter


  • For cap diameters of 16,5 - 39,0 mm
  • High-speed 2000 Hz sampling rate
  • Single Reading USB data output

More details

CAP-TT03 Hand-held Cap Torque Meter

R50 Series Universal Torque Sensor


  • Rugged aluminum housing
  • Unique Plug & TestTM connector holds all calibration and configuration data

More details

R50 Series Universal Torque Sensor

R51 Series Universal Torque Sensors


  • Compatible with the Series 7i, 5i and 3i digital indicators
  • Unique Plug & TestTM connector holds all calibration and configuration data
  • Outstanding overload protection

More details

R51 Series Universal Torque Sensors

Series-3I Force/Torque Indicator


  • Interchangeable force and torque sensors through Plug & Test® technology (sensors are sold separately)
  • High-speed 2.000 Hz sampling rate
  • Ultra-compact size

More details

Series-3I Force/Torque Indicator

Series-5I Advanced Digital Force/Torque Indicator


  • Interchangeable force and torque sensors through, separately sold, Plug & Test® technology
  • High-speed 7.000 Hz sampling rate
  • USB, RS-232, Mitutoyo, and analog outputs

More details

Series-5I Advanced Digital Force/Torque Indicator

Series-7I Advanced Force/Torque Indicator


  • Interchangeable force and torque sensors through Plug & Test® technology (sensors are sold separately)
  • High-speed 14.000 Hz sampling rate
  • Continous data capture of up to 5.000 data points, at up to 14.000 Hz, downloadable to a PC
  • 5 units of measurement, plus Coefficient of Friction and user-defined unit with configurable name

More details

Series-7I Advanced Force/Torque Indicator

Downloads

Buy Now
Products

Product
Price
Quantity
133312
MTT03-10ZE Digital Torque Gauge - 7 Ncm
€ 1.538,00 
133313
MTT03-20ZE Digital Torque Gauge - 14 Ncm
€ 1.538,00 
133314
MTT03-50ZE Digital Torque Gauge - 36 Ncm
€ 1.914,00 
133315
MTT03-12E Digital Torque Gauge - 135 Ncm
€ 1.350,00 
133316
MTT03-50E Digital Torque Gauge - 570 Ncm
€ 1.350,00 
133317
MTT03-100E Digital Torque Gauge - 1150 Ncm
€ 1.350,00 
 
Accessories

Product
Price
Quantity
133953
Long Form NIST certificate with data (ordered with a new gauge)
€ 82,00 
130524
15-1004 MESUR gauge, single license
€ 540,00 
132876
09-1165 Cable, USB, Series 7/5/4/3 to PC
€ 29,00 
132826
08-1026 Replacement battery, 8.4V NiMH
€ 19,00 
131954
AC1030 AC adapter/charger, 110V US
€ 43,00 
131955
AC1031 AC adapter/charger, 220V Europe
€ 43,00 
132878
AC1032 AC adapter/charger, 220V UK
€ 43,00 
132879
AC1035 AC adapter/charger, 220V Australia
€ 43,00 
136807
20-1025 Chuck key, for 1/2” Jacobs chucks, size KK
€ 9,00 
136808
20-1025-1 Chuck key, for 1/4” & 3/8” Jacobs chucks, size KGA
€ 9,00 
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

\n