We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy
Contact 
Contact Us
Email : sales@checkline.eu
Your information request is sent!
We'll contact you as soon as possible.

Your message was successfully sent!

BL2 Universal Biomass Moisture Meter


The BL2 Biomass Moisture Meter Kit is the most versatile biomass moisture meter kit available.
It is specifically developed for users that have to check a large variation of biomass materials.
By use of two different probes it can measure wood chips, sawdust, pellets, round wood, split logs, Hay bales and straw bales.
This Biomass Moisture Meter contains several moisture calibration curves that are activated by connecting the appropriate probe. Measuring results are displayed instantly and are temperature compensated.
The image on the left shows the gauge with the hammer probe with the 255mm Hay & Straw Pins attached.When this probe fitted with the nails it can be used for round wood and split logs.

Below the picture of the wood chip probe that can also be used for pellets and saw dust.

The BL2 can also be supplied with an USB interface (BL2-USB-KIT) and is supplied with USB cable and Software.
 


Features
  • Measuring Range up to 60%
  • Automatic temperature compensation
  • Temperature can be set to °C or °F as required
  • Automatic averaging
  • Measurement within seconds
  • Large illuminated LCD display
  • Rubber protection cover
  • Display Language: English, German, French, Italian, Spanish and Russian

Specifications
Measuring rangeup to 60% water content depending on material and probe type (represents 100% wood moisture)
Resolution0.1% water content
Calibration Accuracy± 2.5 %
Material Temperature Range0° - 40° C (temperature range for determination of water content with temperature compensation)
Temperature Limits-10°C to 80°C
Menu languagesEnglish, German, French, Italian, Spanish and Russian
HousingPlastic with rubber protection cover, IP40 rating
Data logger10,000 moisture measurements plus date, batch & temperature
Data Interface
(BL2-USB only)
USB (supplied with data transfer cable & software)
DisplayGraphic LCD display with backlight (128 x 64 pixel)
Power4 x 1.5 Volt AA Alkaline batteries
Battery Life900 measurements
(with auto-off after 6 minutes of non-use)
Weigth6.4 Kg (Kit in Wooden case)
Dimensions121 x 17.5 x 8cm (LxWxH)
Warranty2 years Manufacturer warranty

Related Products

Cic-Moisture Moisturemeters Calibration


  • Easy planning of calibration
  • Short turnaround
  • Exclusively in accordance with ASTM 2219-98
  • Possibility to adjust and repair

More details

Cic-Moisture Moisturemeters Calibration

BLL Moisture Meter with 1 meter insertion probe


  • Directly mounted insertion probe
  • Conversion of wood moisture into water content

More details

BLL Moisture Meter with 1 meter insertion probe

BLW Timber Moisture Meter


  • High measuring range to 60% water content represents 150% wood moisture
  • Allows quality checks and documentation on site
  • No conversion between moisture content depending on dry-mass to moisture content depending on total mass necessary

More details

BLW Timber Moisture Meter

MCT-HS Hay and Straw Moisture Meter With Stabbing Probe


  • Directly mounted insertion probe
  • Hold function
  • Length of insertion probe: 0.6 meter

More details

MCT-HS Hay and Straw Moisture Meter With Stabbing Probe

Complete Kit

The complete kit consists of the following items:

  • BL2 or BL2-USB Gauge
  • Wood chip Probe
  • Hammer Probe
  • Spare 40mm & 60mm nails (10 pcs each)
  • 255mm Hay and Straw Pins (2 pcs)
  • 4 AA Batteries
  • Wooden foam fitted case
  • USB Cable and Software (BL2-USB Kit Only!)

 



Buy Now
Products

Product
135010
BL2-KIT Universal Biomass Moisture Meter Kit
     
134518
BL2-USB-KIT Universal Biomass Moisture meter with USB port
     
 
Accessories

Product
131808
PRINTER-Portable Battery Powered Thermo Printer
     
132022
Calibration Certificate - Factory calibration certificate protocol for humidity meters
     
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request

\n