PZX-7DL Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output
The Dakota PZX-7DL is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.
The built-in data logger has a capacity of 10,000 data values stored in up to 40 batches with 250 values/batch which is transferred via the USB port using the supplied cable. The Dakota PZX-7DL does not require any software, it will be shown as a drive when connected to a PC allowing convenient drag-n-drop into your program of choice. Data is saved in a comma delimited file format (.csv) which makes it compatible with all programs and software.
The PZX-7DL has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000).
Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode
The PZX-7DL can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm).
Range with Standard Delay Line Transducer
0.150 - 25.40 mm
Range with Contact Transducers
up to 915.0 mm
- Total Measuring Range(Steel): 0.150 - 25.40 mm (depending on transducer/probe type and material)
- Sequential data storage, 40 files of 250 readings per file, for 10,000 readings
- Resolution of 0.001 mm
- Measuring unit switchable between mm and inch
- High visibility LCD Display is readable in all lighting conditions and temps as low -30 °C
- Impact-resistant and environmentally sealed (IP 65) extruded aluminum housing
- Selectable Backlight ON/OFF/AUTO
- 5 Year Warranty
The PZX-7DL is supplied as a complete kit with:
- PZX-7DL gauge
- T-402-5507 probe
- 120 ml bottle of coupling fluid
- USB-C Data transfer cable
- 2 AA batteries
- NIST Traceable Calibration Certificate
- Instruction Manual
- All in a foam-fitted carrying case
TI-007DLX for high-resolution measurements on thin-wall materials
- Data storage for 10,000 measured values, in 40 stacks of 250 measured values each
- 3 exchangeable measurement modes: Pulse-Echo (P-E), Interface-Echo (I-E) and Plastics (PLAS)
- Resolution of 0.001mm
More details
TI-PVX Precision Ultrasonic A-scan Wall Thickness Gauge
- Multiple calibration options: One Point, Two Point, or selection from a Material List.
- 16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications.
- Hardware AGC gain control for multiple echo and thru-paint measurement.
More details
| Total Measuring Range with standard probe on steel: | 0.15 - 924 mm |
| Probe (Standard): | 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) |
| Probes (optional): | Various Single Element Delay Line and Contact Transducers (5 to 20MHz) |
| Display Backlight: | Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options |
| Operating Temperature: | -30 to 75°C |
| Measuring Modes: | Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) |
| Pulse Repetition Frequency (PRF): | 200 Hz (200 pulses/sec) |
| Output: | USB |
| Output Optional: | RS-232 and Bluetooth |
| Display Update Rate: | 10 Hz (10 updates / second) |
| Housing: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) |
| Housing Protection: | IP65 |
| Battery Type: | 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) |
| Keypad: | Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys |
| Cable: | 1.2 m |
| Dimensions: | 64 x 131 x 32 mm |
| Certifications: | NIST Traceable and MIL-STD-45662A |
| Warranty: | Gauge: 5 Years Probes: 90 Days |
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request