Call us for more information
+44 (0)121 2855 222

DTEB - DTEX Tension meter with small measuring head

The DTEB - DTEX Tension meter with small measuring head is no longer available and has been replaced by DTSE / DTXE.
Click here to see the DTSE / DTXE.

Made in Germany Tension meter with small measuring head, where access space is limited or where filaments run close together

The tension meter has turned-up finger edges for easy threading.

Note: The design is otherwise according to model DTMB respectively model DTMX, but no material thickness compensator.

Features

Turned-up outer finger edges guide the running filament into the roller grooves
Length of measuring head approx. 59 mm
Small, ball-bearing mounted, V-grooved guide rollers
Everything in operator's view:
- the guide rollers
- the measured material
- the readings
Filament guide and roller shifting mechanism ensure easy acquisition of the running material
Ball-bearing mounted, V-grooved guide rollers
Rugged aluminum housing
Battery operated (AC adapter for continuous operation available)
Specific Test Report with calibration report optionally available

Tension Ranges

Model	Ranges	SCHMIDT Calibration Material**	Resolution	*Measuring Head Width mm**
DTEB-200	2.0-200.0	PA: 0.12 mm Ø	0,1 cN	38
DTEB-500	5.0-500.0	PA: 0.20 mm Ø	0,1 cN	38
DTEB-1000	50-1000	PA: 0.30 mm Ø	1 cN	38
DTEB-2000	200-2000	PA: 0.50 mm Ø	1 cN	38
DTEX-200	2.0-200.0	PA: 0.12 mm Ø	0,1 cN	38
DTEX-500	5.0-500.0	PA: 0.20 mm Ø	0,1 cN	38
DTEX-1000	50-1000	PA: 0.30 mm Ø	1 cN	38
DTEX-2000	200-2000	PA: 0.50 mm Ø	1 cN	38
Other units of measure available, such as g. * Suitable for 95% of applications - PA = Polyamide Monofilament Measuring Head Width 38 mm (Width of bracket assembly) Measuring Head Length 59 mm Special calibration using customer supplied samples is recommended, if process material differs significantly from the SCHMIDT calibration material in diameter, rigidity or shape. For this purpose a material sample of about 5 m should be supplied.

Complete Kit

Delivery includes:
Tension meter with carrying case and batteries, operating instructions in English or German as requested

Specifications

Calibration:	According to SCHMIDT factory procedure
Measuring Head width:	38 mm
Measuring Head Length:	59 mm
Accuracy:	for 10% to 90% of range: ± 0.5% full scale and ± 1 digit remaining range and other calibration material: ± 3% full scale and ± 1 digit
Overrange:	Approx. 15% full scale, without accuracy guarantee
Overload protection:	100% of tension range
Measuring principle:	Strain gauge bridge
Measuring roller deflection:	0.2 mm max.
Signal processing:	Digital
Measuring frequency:	62 measurements/sec
Converter:	12 bit A/D
Temperature coefficient:	Gain: less than ± 0.01% full scale/°C Zero point: less than ± 0.3% full scale/°C
Display:	4-digit LCD, 12 mm high
Display update rate:	0.5,1,2 or 4 seconds selectable
Memory:	Last, MIN, MAX, PEAK values
Temperature range:	10 - 45ºC
Air humidity:	85% RH, max.
Power supply:	4 size AA batteries 1.5 V (about 20 hours of continuous use)
Auto power off:	After 2 minutes of non-use
Housing material:	Die-cast aluminum
Housing dimensions:	235 x 76 x 45 mm (L x W x H)
Weight, net (gross):	approx. 680 g (1500 g)
Extended memory:	up to 100 tension values, average, standard deviation
Digital output:	RS232C (4800, 8, N, 2)
Analog output	0-1 V DC (conversion rate 16 ms)
Digimatic:	Mitutoyo