We Checkline Europe B.V. would like to use cookies and similar technologies in order to optimize your shopping experience and this requires your consent. By clicking on the "Accept cookies" button you agree to our use of cookies and similar technologies. If you do not agree, you can refuse the use or customize settings for the respective cookies by clicking on the button "Cookie Settings".You also have the possibility to specify that only certain cookies, which we use on our website, should be activated. This banner will be displayed until you have selected your cookie preferences. If you decide against the use of cookies, we will not use cookies nor similar technologies, except those that are essential for the proper functioning of the website. Click here for our privacy policy

136-3E Wire/Cable Tension Meter
(for wires anchored at both ends)


Made in Germany5 Ranges, up 1000lbs / 500 Kg / 5000N
For Wire Diameters up to 0.200" / 5mm

Designed for measuring wires & cables that are anchored/fixed at both ends (closed system) such as guy wires, support cables, tethers and more. Also commonly used on Kevlar, fiberglass and other hi-strength materials when used in similar applications.

The 136-3E employs a unique roller configuration and measurement scheme to minimize the deflection of the wire/cable. The total wrap angle of the material over the center sensing roller is 3 degrees eliminating all measurement errors!

No other company or product in the world can make this claim!

The material threading pattern (refer to illustration below) ensures easy material acquisition and good tactile feedback allowing for excellent repeatability between measurements as well as between different users.

Precision ball-bearing rollers are used to eliminate any error caused by friction. These rollers are mounted on a large mounting plate properly spaced to remove the negative influence normally caused by the inherent rigidity of wires and cable up to 5 mm in diameter (0.200").


Diameter Compensation Adjustment

The 136-3E is fitted with an exclusive mechanical compensation which adjusts the measuring geometry to ensure optimal accuracy regardless of the diameter of the material to be measured.

It consists of a calibrated rotary dial fitted to the rear-side of the right outer roller. The user simply rotates the dial until the numeric value on the dial is set to the actual wire diameter &then is locked in position. To change for a larger or smaller diameter, unlock and dial to a new value. Simple, quick and effective!


Features
  • Built-in material diameter compensation for error-free measurements of samples up to 5 mm (0.200")
  • Splashproof version of sensor & indicator is offered for use in wet environments (in rain or near splashing water)
  • Minimal material deflection eliminates measurement errors
  • Wear-resistant, ball-bearing guide rollers eliminate errors caused by friction

Tension Ranges
Model    
1363E-10LB-V 0-10 Lb
0-5 Kg
0-50 N
    
1363E-100LB-V 0-100
0-50 Kg
0-500 N
    
1363E-200LB-V 0-200 Lb
0-100 Kg
0-1000 N
    
1363E-500LB-V 0-500 Lb
0-250 Kg
0-2500 N
    
1363-1000LB-V 0-1000 Lb
0-500 Kg
0-5000 N
    

Related Products

D-485 Digital Tension Indicator with Built-In Amplifier


  • Automatic zero setting
  • "Peak" function retains maximum reading on display

More details

D-485 Digital Tension Indicator with Built-In Amplifier

Specifications
Accuracy± 1.5% Full Scale or better
Outer Roller370 mm
Wrap Angle3 Degrees
Additional Length Effect0.12 mm
Guide RollersV-Grooved Aluminum 47/21 mm (OD/Root Diameter)
Overload Protection200%
Calibration CertificateOptional
PricingPlease Contact Us for pricing

Downloads

Contact 
Request offer
Your information request is sent!
We'll contact you as soon as possible.
 Information