231/100 - Circular Sample Cutter

This round cutter can be used to cut samples or specimens from materials for analysis, testing, or inspection. The 231/100 Sample Cutter has a sample cutout 100 cm2, Ø 113 mm, for max. 10 mm material thickness.

This model is very easy and save to use:

• Position the material to be cut on the rubber plate while maintaining tension to prevent creases.
• Center the sample cutter on the material, ensuring it rests preferably at the midpoint of the rubber plate.
• Disengage the blocking pin by pulling it out and rotating it 90°.
• Turn the hand wheel in a clockwise direction, completing slightly more than a 1/4 rotation (90°), while applying gentle downward pressure.
• Secure the blocking pin by pulling it out and rotating it 90°.
• Raise the sample cutter and retrieve the completed sample.
• After each use, store the instrument with the blocking pin in the safety position (pressed in) to prevent hand injuries and blade damage.

This Circular Sample Cutter is commonly used in various industries, including textiles, paper, plastics, leather, and more. 
According to International norms: ISO 3801, ISO 12127, ISO 536, ISO 186, ISO 1183-1:2012, ISO 9864, EN 12127, ASTM-D3776-D3776M-20, ASTM D2646

The use of a sample cutter ensures consistent and precise samples, which are crucial for reproducible test results and analyses in laboratories and production environments.

Designed to precisely cut samples of various materials, such as woven, non-woven, knitted fabric, fleece, carpet, films, foil or paper. To cut accurate circular samples with smooth edges. 

Typical used to determination weight per unit area of fabric, paper etc.
Even difficult materials such as fine knits, thin films, tissue paper, corrugated cardboard and synthetic leather can be cut conveniently.