MX-110 Motorized Vertical Test Stand
The new MX-110 test stand offers consistent and reliable testing. The combination of a screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Connect the MX-110 test stand with a Z Series force gauge and enable force controlled testing. Force control can automatically stop testing when the force value reaches the high setpoint programmed on the Z Series force gauge, or maintain the force between the Z Series High and Low setpoints. Force control is ideal for fatigue or non-destructive testing.
The MX-110 accepts any of the standard range force gauges. Quick switch and Emergency Stop features are also included.
*FORCE GAUGE NOT INCLUDED
Designed to work with the Z2 & ZP force gauges.
- One stand for both compression (push) and tension (pull) tests
- Force Controlled operation with Z2 and ZP force gauges
- 3 speed ranges:
0.4 – 11.5 in/min
0.7 - 23.0 in/min (MS)
1.5 - 47.0 in/min (HS) - Jog, Single Cycle, Continuous Cycle, Force Control
- Maximum clearance 9" (with extender 14")
SW-1 Data Acquisition Software for Force Gauges & Torque Gauges
- Full SPC and graphing capabilities
- Automates your data collection
- Provides a running log of all measurements along with a chart of the data as well as statistical information
More details
DS2 Digital Force Gauge
- Real time and peak mode (selectable)
- lb, kg, and Newton units are push-button selectable
More details
HV-110 Manual Test Stand
- Hand wheel design provides a high degree of precise control
- Optional digital distance meter
More details
DB Data Input Button
- Send data to the PC spread sheet with the touch of a button
- Zero the gauge
- Select different acquisition rates
More details
| Model | Speed Range | Distance Meter |
|---|---|---|
| MX-110 | 0.4 – 11.5 in/min (10 - 292 mm/min) |
No |
| MX-110-MS | 0.7 - 23.0 in/min (18 - 584 mm/min) |
No |
| MX-110-HS | 1.5 - 47.0 in/min (38 - 1194 mm/min) |
No |
| MX-110S | 0.4 – 11.5 in/min (10 - 292 mm/min) |
Yes |
| MX-110S-MS | 0.7 - 23.0 in/min (18 - 584 mm/min) |
Yes |
| MX-110S-HS | 1.5 - 47.0 in/min (38 - 1194 mm/min) |
Yes |
| Capacity | 110lbs / 50Kg |
| Travel Rate | Refer to Ordering Guide above |
| Dimensions | Refer to Dimensions above |
| Compatible Gauges | Z2, ZP and DS2 |
| Warranty | 2 years |
| *Note | Optional Distance Meter Max Sampling Rate Output - 2 Samples Per Second |
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request