T-212-2001 Transducer

1/4" - 5 MHz Hi Temp - 900 °F / 500 °C Dual Microdot connectors, top-in

HIGH TEMPERATURE MEASUREMENT PROCEDURE

• Grind exessively rough or corroded surfaces smooth for proper coupling
• Measure temperature of test surface
• Select appropriate couplant and transducer for the application
• Perform a probe zero according to the gauge manual.
• Apply couplant to probe face and then couple to the test surface. DO NOT APPLY TO THE HOT TEST MATERIAL FIRST.
• Use only light transducer contact pressure to achieve proper coupling.
• Look for the measurement value to be displayed within 1-2 seconds.
• Gently rock the probe, if necessary, to get a displayed value. DO NOT INCREASE CONTACT PRESSURE OR REMAIN IN CONTACT FOR MORE THAN 5 SECONDS TO AVOID DAMAGING THE PROBE.
• Uncouple the probe and immerse in cool water or air cool until the probe returns to ambient temperature.
• Wipe remaining used couplant from probe before applying new couplant for the next measurement.

WARNING!

Internal probe temperatures above 150 °C can damage the probe, resulting in excessive ringing. loss of sensitivity or total probe failure.