PTA PTA/PTAF Plug & Test Load Cell Adapter
Plug & Test® technology is used with the Mark-10 Series-3I, 5I, 7I Indicators and Series-F Test frames.
To be able to connect user supplied strain gauge load and/or torque cells the PTA/PTAF adapter was developed..
Plug & Test® technology saves all configuration and calibration information within the adapters PCB. This flexibility allows for interchangeability between multiple sensors with any Mark-10 Series F test frame.
The PTA adapter is used with Series-#I Indicators and model F755 and F1505 test frames
The PTAF adapter is used connect to model F105, F305, F505 and F505H test frames and can be used on model F755 and F1505 test frames when an AC1083 adapter is used.
Sensor capacity and resolution may be configured via an included software utility, which includes a library of common force capacities from 0.5 N to 4,000 kN, and torque capacities from 7 Ncm to 57.000 Nm.
When an identification number is configured, it is displayed upon hardware power-up or the test stands display.
- Connects third party strain gauge load cell's to Mark-10 Series-F test frames and Indicators models
- Compatible with strain gage-based load cells, force sensors, and torque sensors
- Screw terminal block allows for easy connection of sensor wires
- Software configuration utility is included, for easy programming of sensor capacity, resolution, and identification number
- Supplied with a strain relief, user-writeable identification label, and Resource CD with software
- Program the adapter via USB or RS-232 through the indicator
Series-3I Force/Torque Indicator
- Interchangeable force and torque sensors through Plug & Test® technology (sensors are sold separately)
- High-speed 2.000 Hz sampling rate
- Ultra-compact size
More details
Series-5I Advanced Digital Force/Torque Indicator
- Interchangeable force and torque sensors through, separately sold, Plug & Test® technology
- High-speed 7.000 Hz sampling rate
- USB, RS-232, Mitutoyo, and analog outputs
More details
Series-7I Advanced Force/Torque Indicator
- Interchangeable force and torque sensors through Plug & Test® technology (sensors are sold separately)
- High-speed 14.000 Hz sampling rate
- Continous data capture of up to 5.000 data points, at up to 14.000 Hz, downloadable to a PC
- 5 units of measurement, plus Coefficient of Friction and user-defined unit with configurable name
More details
F105 / F305 / F505 / F505H Force Test Frame with IntelliMESUR® controls
- Set up, run, and analyze data via the integrated IntelliMESUR® control panel
- Integrated motion control and data collection solution with seamless interface for FS05 force sensor without cables
- Plug & Test® system can work with third-party load cells through PTAF adapter
More details
F755 / F1505 F755 / F1505 Force Test Frame
- Set up, run, and analyze data via the integrated IntelliMESUR® control panel
- Build in test creation wizards
- Integrated motion control and data collection solution.
More details
| Sensor Requirements | Sensor type: Full bridge Sensor resistance: 300 - 1000 ohms Sensor sensitivity: 1 - 3 mV/V full scale |
| PTA | Mark-10 indicator with firmware version 1.0.9 or later The PTA adapter cannot be configured using older indicator versions. |
| PTAF | Mark-10 indicator with firmware version 2.2.8 or later The PTA adapter can be used with older indicator versions, however, the adapter cannot be calibrated for single-direction load cells, such as load button and thru hole type load cells. |
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request