HTG Series - Handheld Type Digital Torque Gauge
The HTGA versions are currently not available
The HTG-Series Digital Torque Gauge is equipped with an electro luminescent display, which is highly visible in dark locations. It is a very user friendly handheld torque meter with his easy-to-use menus. It has multi-language program menus: English, Spanish, French, Chinese, German, Italian, Korean and Japanese.
The HTG-Series Digital Torque Gauge can be used for measuring the torque of:
- Screws
- Components
- Drive shafts
- Plug connectors
- Etc.
Electro luminescent EL display shows torque value, unit, and peak, and can be configured with additional user-selectable data including memory data, +NG count, high/low setpoints, 1st and 2nd peaks, torque angle, etc.
Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights for less than low setpoint, green lights between high and low, and red for over the high.
Process and transmit 2,000 actual data per second, not just the peak from a high sampling rate. Optional Force Recorder data acquisition software is required to record at speeds up to 2,000 data per second.
Save data to USB flash drives. Export peak data or capture continuous data at 100 data/second to flash drives with HTGA models.
The included data logger software ZT-Logger downloads data from the gauge memory or captures a continuous stream of data at 10 data/second. (You can make a graph with Excel later). Zero the gauge or capture data while at the computer. All gauge programming can be set and saved from the software.
The HTG-Series Force Gauge are available in 2 versions:
Series HTGS (Standard) & Series HTGA (Advanced)
The HTGA versions are currently not available
The HTGA (advanced) has more useful functions:
- 1st/2nd peak
- Angle detection at torque peak value (*1)
- Angle zero reset at selected torque(*1)
- Sub comparator 2 steps (output of large or small judgment)
- Angle (displacement) (*1)
Even in the case when you cannot connect PC during measurement, you can save data in USB flash drive, and later transfer data to PC via the USB drive. On PC you can draw the data into a graph with Excel.
(*1) Angle(displacement) function is required (Only HTGA).
- Selectable units: lbf-in, ozf-in, N-m, N-cm, kgf-m, kgf-cm.
- Selectable units: lbf-in, ozf-in, N-m, N-cm, kgf-m, kgf-cm.
- USB (virtual COM port), RS-232C, Digimatic and Analog outputs
- External switch display hold and clear
- Real time and peak mode (selectable)
- Overload capacity 200% of F.S
- Programmable high/low setpoints with color-coded LED indicators and output signal for quick Go/No Go testing
- Sample and transmit 2,000 data/sec using optional Force Recorder software
- Internal Ni-MH batteries or AC adapter
- Overload alarm and output signal
- 1,000 data memory for recall or download
Kit includes:
- 6.5mm chuck,
- ZT Logger data acquisition software,
- USB cable,
- Allen wrench,
- AC adapter/charger,
- calibration certificate traceable to NIST and
- carrying case (handles for "85" range only).
Optional: 13mm Jacobs chuck available
| Electroluminescent display (ELD) |  |
|
|---|---|---|
| Functions | HTGS | HTGA |
| Peak hold (clockwise and counter-clockwise) | ||
| Comparator (judgment of OK or NG) | ||
| Reversible display | ||
| Sign inversion | ||
| Multi display | ||
| Internal memory | 1000 data | 1000 data |
| +/- Force | ||
| Auto zero timer | ||
| +NG alarm | ||
| Auto shut off | ||
| Time display | ||
| 1st/2nd peak | - | |
| Angle detection at torque peak value (*1) | - | |
| Angle zero reset at selected torque (*1) | - | |
| Output | HTGS | HTGA |
| Serial (RS232C) | ||
| Mitutoyo digimatic [*2] | ||
| Analog | 2 VDC (D/A) | 2 VDC (D/A) |
| USB | ||
| Comparator 3 steps (-NG/OK/+NG) | ||
| Overload warning | ||
| Sub comparator 2 steps (output of large or small judgment) | - | |
| Memory in USB flash drive [USB flash drive is not included] |
- | |
| Angle(displacement) (*1) | - | |
| (*1) Angle (displacement) function is required (*2) Not always available for Mitutoyo digimatic products |
||
| Model | Standard | Optional (*L) |
| HTGS-4 | 4.0mm / 0.157" | NA |
| HTGS-15 | 6.5mm / 0.260" | 13mm / 0.512" |
| HTGS-40 | 6.5mm / 0.260" | 13mm / 0.512" |
| HTGS-85 | 6.5mm / 0.260" | 13mm / 0.512" |
| *For 13mm Chuck add "-L" to part # ie: HTG2-15L | ||
| Min/Max Sample Diameters | ||
| Chuck Size | Min Sample | Max Sample |
| 6.5mm / 0.260" | 0.5mm / 0.020" | 6.5mm / 0.260" |
| 13mm / 0.512" | 0.7mm / 0.028" | 13mm / 0.512" |
| Accuracy | ± 0.5% Full Scale ± 1 LSD |
| Selectable Units | lbf-in, ozf-in, N-m, N-cm, kgf-m, kgf-cm |
| Overload warning | Approx. 110% F.S. (Warning message and alarm ) |
| Overload Capacity | 200% of F.S. |
| Power | Rechargeable Ni-MH battery pack or AC adapter |
| Battery Indicator | Indicates three charge states high, med and low |
| Memory | Non-volatile, recall up to 1,000 data |
| Setpoints | Programmable high/low setpoints w/ color-coded LEDs & output signal |
| Outputs | USB (virtual COM port), RS-232C, Digimatic and ± 2 VDC analog output |
| Operating Temperature | 0° to 40°C |
| Weight | Display : approx.490g |
| Warranty | 1 year |
| Model | Capacity | Resolution | Included Chuck Size | Included Handle |
| HTGS-4 / HTGA-4 | 4,000 lbf-in 5,000 kgf-cm 50,00 N-cm | 0.01 lbf-in 0.001 kgf-cm 0.01 N-cm | 4 mm | No |
| HTGS-15 / HTGA-15 | 1,00 lbf-in 20,00 kgf-cm 200,0 N-cm 2 N-m | 0.01 lbf-in 0.01 kgf-cm 0.1 N-cm 0.001N-m | 6.5 mm | No |
| HTGS-15L / HTGA-15L | 1,00 lbf-in 20,00 kgf-cm 200,0 N-cm 2 N-m | 0.01 lbf-in 0.01 kgf-cm 0.1 N-cm 0.001N-m | 13 mm | No |
| HTGS-40 / HTGA-40 | 40,00 lbf-in 50,00 kgf-cm 500,0 N-cm 5 N- | 0.01 lbf-in 0.01 kgf-cm 0.1 N-cm 0.001N-m | 6.5 mm | No |
| HTGS-40L / HTGA-40L | 40,00 lbf-in 50,00 kgf-cm 500,0 N-cm 5 N- | 0.01 lbf-in 0.01 kgf-cm 0.1 N-cm 0.001N-m | 13 mm | No |
| HTGS-85 / HTGA-85 | 85,0 lbf-in 100,0 kgf-cm 1000 N-cm 10 N-m | 0.01 lbf-in 0.01 kgf-cm 0.1 N-cm 0.001N-m | 6.5 mm | Yes |
| HTGS-85L / HTGA-85L | 85,0 lbf-in 100,0 kgf-cm 1000 N-cm 10 N-m | 0.01 lbf-in 0.01 kgf-cm 0.1 N-cm 0.001N-m | 13 mm | Yes |
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request