TI-25DL-MMX Data Logging Through Paint Ultrasonic Wall Thickness Gauge
The TI-25DL-MMX Data Logging Through Paint Ultrasonic Wall Thickness Gauge is no longer available and has been replaced by TI-25DLXT.
Click here to see the TI-25DLXT.
The TI-25DL-MMX precisely measures wall thickness using ultrasonics. Materials that can be measured are all metals, ceramics, glass, and most rigid plastics. Measurements can be made from a single side!
The TI-25DL-MMX has 2 measuring modes: Single Thickness Reading mode which measures the thickness on one point and the Scan mode which measures over a larger measuring area by “dragging” the probe: the minimum thickness encountered during the scan will be displayed then.
The gauge has a built-in memory for 1000 data points that can be separated into 10 separate "batches". You can download the stored data to a serial printer or PC and with no additional costs a Windows compatible data transfer program is supplied.
The probe of the TI-25DL-MMX wall thickness gauge is waterproof and can also be submerged in water. It is ideal to use in tough field conditions because the gauge is impact-resistant and environmentally sealed.
Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.63 to 500 millimeters (0.025 to 19.999 inches).
Echo-Echo Mode(Through Paint & Coatings) measures from 2.54 to 25.4 millimeters (0.1 to 1 inch).
- Resolution of 0.001 inch (0,01 mm)
- Simple operator controls virtually eliminate training
- Ability to measure through paint and eliminate coatings
- Large, backlit LCD display retains last reading
- Special-purpose probes are offered for a variety of applications
- Memory for 1000 data points in up to 10 batches
- RS-232C Serial output for downloading stored data to a printer or computer
- Switch-selected units for inches or mm
- For underwater surveying, probe cable lengths up to 50 feet are optionally
- CE Certified
- Includes NIST Calibration Certificate
TI-SB Steel Test Block with NIST-Traceable Certificate
- Precision Machined and Finished
- Includes NIST Report and Test Data
More details
TI-SB4 Uncertified Steel Test Block
- Uncertified Steel Test Block
- For convenient confirmation of thickness gauge calibration
More details
TICC-M Protective Holder for Ultrasonic Gauges
- Constructed from heavy duty Cordura Nylon
- Belt loop included
- Includes wrist & shoulder straps
More details
TI-V-BLOCK Transducer Holder
- The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only.
More details
CF-AN Coupling Fluid
- Used to create an ultrasonic coupling between the probe and material to be measured
- Available in different volumes - 125ml / 250ml / 500ml / 1ltr / 5ltr / 25ltr
More details
Cic-Wall | Wall Thickness Gauge Calibration
- Easy planning of calibration
- Short turnaround
- Exclusively in accordance with DIN 55 350 Part 18, § 4.2.2, DIN ISO 8402 Part 1
- Possibility to adjust and repair
More details
- the gauge
- probe
- 4 oz. bottle of coupling fluid
- 2 AA batteries
- NIST Calibration Certificate
- data transfer software
- serial output cable
- Operating Instruction Manual
all in a foam-fitted carrying case.
| Selection Guide - Pit & Flaw Detection (Pulse-Echo) Mode | |||
|---|---|---|---|
| Model Number | Maximum Coating | Minimum Wall | Maximum Wall |
| All Models | 0.50mm (0.020") | 1,01mm (0.100") | 152.4mm (6.000") |
| Selection Guide - Thru-Paint (Echo-Echo) Model | |||
|---|---|---|---|
| Model Number | Maximum Coating | Minimum Wall | Maximum Wall |
| TI-25M-MMX | 1.00mm (0.040") | 2.54mm (0.100") | 25.4mm (1.000") |
| TI-25M-MMX-EXT | 2.00mm (0.080") | 5.08mm (0.200") | 127.0mm (5.000") |
 | Minimum Radius for Convex Surfaces | 8,89 mm |
| Minimum Radius for Concave Surfaces | 76,2 mm | |
 | Minimum Headroom | 25,4 mm |
 | Minimum Sample Diameter | 3,8 mm |
 | Minimum Substrate Thickness - F | NA |
| Minimum Substrate Thickness - NFe | NA |
| Range | Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe)0.63 to 150 millimeters (up to 500 mm if uncoated using T-102-2000 probe). Echo-Echo Mode (Through Paint & Coatings) measures from 2.54 to 25.4 millimeters (0.1 to 1 inch) |
| Resolution | 0.01 mm (.001") |
| Display | 4½ - Digit, 0.5" Backlit LCD |
| Velocity Range | 0.0492 to .3937 in./µs. (1250 to 10.000 meters/second) |
| Probe | 5 MHz, 6.35 mm Diameter (0.25") |
| Probe Wearface | PEEK (Polyethlethylketone) |
| Cable | 1.2 m (4 ft.) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 15 m (50 ft.). |
| Temp. Limits | Ambient: -30 to 50° C (-20 to 120° F) Material: -20 to 100° C (0 to 200° F) Special high temperature probes are optionally available |
| Serial Output | RS-232C (8, N, 1, user-set baud rate) |
| Battery Type | Two AA batteries |
| Battery Life | 200 hours |
| Weight | 196 g (7 ounces) |
| Size | 64 x 114 x 32 mm (2.5 x 4.5 x 1.25") |
| Warranty | Gauge: 5 Years Probes: 90 Days |
| Accessories Included | Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |