TI-MMX-SDL High Performance Data Logging Wall Thickness Gauge
The CHECKLINE ultrasonic thickness gauge model TI-MMX-SDL provides the user with many advanced features. It has a complete alphanumeric system for data logging which can store thousands of data values.
The TI-MMX-SDL is easy to use and has the highest resolution graphic LCD available on the market.
- Equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform and Large Digits).
- The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
- Built in hardware AGC gain control for through paint measurements in multi mode operation.
- The TI-MMX-SDL has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
- CE Certified
- Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
- The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
- Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
- The TI-MMX-SDL also comes complete with our Windows® PC software for transferring data to and from a PC.
- Includes NIST Calibration Certificate
- 2 Year warranty
The TI-MMX-SDL is supplied as a complete kit with:
- TI-MMX-SDL wall thickness gauge
- 4 oz. bottle of coupling fluid
- 2 AA batteries
- NIST Calibration Certificate
- data transfer software
- serial output cable
- instruction manual
- delivered in a foam-fitted carrying case
TRANSDUCER SOLD SEPARATELY
TI-SB Steel Test Block with NIST-Traceable Certificate
- Precision Machined and Finished
- Includes NIST Report and Test Data
More details
TI-SB4 Uncertified Steel Test Block
- Uncertified Steel Test Block
- For convenient confirmation of thickness gauge calibration
More details
TICC-MVX Protective Holder for Ultrasonic Gauges
- Constructed from heavy duty Cordura Nylon
- Built-in belt loop
- Includes wrist & shoulder straps
More details
TI-V-BLOCK Transducer Holder
- The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas.
For 3/16" & 1/4" Transducers only.
More details
CF-AN Coupling Fluid
- Used to create an ultrasonic coupling between the probe and material to be measured
- Available in different volumes - 125ml / 250ml / 500ml / 1ltr / 5ltr / 25ltr
More details
TI-PRINTER Portable Serial Printer for Wall Thickness Gauges
- Small, portable and easy to use
- Prints statistical data from ultrasonic wall thickness gauges with a serial (RS232) output
More details
Li-Ion Rechargeable AA Batteries via the USB to USB-C
- Li-Ion rechargeable battery
- Stable voltage of 1,5 V over 95% of the runtime
- Charged via the USB to USB-C cable
More details
Cic-Wall | Wall Thickness Gauge Calibration
- Easy planning of calibration
- Short turnaround
- Exclusively in accordance with DIN 55 350 Part 18, § 4.2.2, DIN ISO 8402 Part 1
- Possibility to adjust and repair
More details
| Range in Steel: | Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches) Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches). Range will vary +/- depending on the thickness of the coating. |
| Resolution: | 0.01mm (.001 inches) |
| Velocity Range: | .0492 to .3936 in./ms 1250 to 9999 meters/sec |
| Units: | English & Metric |
| Measurement Modes: | - Pulse-Echo (flaws, pits) - Echo-Echo (thru-paint) |
| Types of measuring probes: | Dual Element (1 to 10 MHz). |
| Memory: | 16 megabit non-volatile ram |
| Memory capacity: | 12.000 pages with 1 reading and waveform per page |
| Power Source: | Three 1.5V alkaline or 1.2V NiCad AA cells |
| Battery Life: | Typically operates for 150 hours on alkaline and 100 hours on NiCad |
| Auto Power off: | if idle 5 min |
| Display: | 1/8 in. VGA grayscale display 62 x 45.7mm |
| Keyboard: | Membrane switch with twelve tactile keys |
| Case: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Operating Temperature: | -10° to 60°C (-14° to 140°F) |
| Weigth, net: | 383 grams |
| Dimensions: | 63.5 W x 165 H x 31.5 D mm |
| Warranty: | 2 year limited |
| Certification: | CE Approved, Factory calibration traceable to US standards |
Accessories
Product
Price
Quantity
All mentioned prices are excluding VAT & excluding shipment costs.
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request