RFS150-XY Radial force sensor with 2 measuring axis
Available in 14 rated load ranges:
0 - 5N to 0 - 1000N
The dual-axis radial force sensor offers two measuring axes, vertically to each other. Force introduction occurs radially at the bearing journal. Any acting force can be splitted vectorially into X- and Y-components.
Fields of application:
- for research and industry
- acquisition of axle loads, bearing reactions and unbalances
- XY-force measurement on shafts and axles force measurement on pivot joints and crankshafts
- recording of polar force diagrams
The high mechanical stiffness of the load cell enables measurement with virtually no excursion.
The specified and calibrated accuracy remains unchanged throughout the unit’s service life and, across wide ranges, is independent of direct axial forces.
Both force signals get conditioned with a 2-channel measuring amplifier solution. Value and direction of the acting force are acquired.
For analysis the data can be stored in the PC, e.g. with the software HCC-Easy.
Its export function enables the user to transfer the data to further software for extended analysis, e.g. generating a XY-diagram.
- 2 measuring axis, vertically to each other
- Independent of the force introduction point, i.e. the sensor is not affected by lever arm action
- Thought-through concept of housing for simple mounting
- High overload protection
- No influence of any axial tilt torques or direct axial forces which might appear
- Robust, stainless steel housing
TS621 Strain Gauge Amplifier
- Designed for use with a wide range of strain-gauge-based force, load and tension sensors
- 0-10VDC analog output
More details
DPM502 Digital Tension Indicator
- Selectable “damping function” reduces display fluctuations
- 24V DC power supply with galvanic isolation
More details
MU621 Tension Indicator/Amplifier Console
- For strain gauge sensors
- 1 to 4 measuring channels
More details
| Accuracy | ±0.2 % |
| Input resistance | 350 Ohm ± 3 |
| Output resistance | 350 Ohm ± 1 |
| Operational temperature | Sensor: -10 to 70 °C Connection Cable: -30 to 80 °C |
| Storage temperature | -30 to 70 °C |
| Overload Protection | 400 - 800 % (depending on nominal force) |
| Weight | 400 g |
| Sensor Material | Stainless Steel |
| Protection | IP50 |